184001186 - 2710A52 DIFFERENTIAL END SLIDING JOINT (ONE) L/H OR R/H - R + R WITH DRIVE SHAFT REMOVED - INCLUDES BOOT REPLACEMENT
Removing
(
Refitting
)
Place the driveshaft in a vice fitted with protective jaws.1. Remove the circlip (1a) and release the three lobe joint (1b) from the driveshaft.2. Loosen the band (2a) and remove the protective boot (2b).
Refitting
(
Removing
)
Place the protective boot in ist housing and secure it using the band.Place the three lobe joint in its housing on the driveshaft and secure it using the circlip.Fill the protective boot and bearing with the recommended grease. | Type | Component | Name | Qty. |
|---|---|---|---|---|
| - | Grease (g) | DRIVESHAFT SLIDING COUPLING | TUTELA MRM ZERO | - |