184001193 - 3310A14 FRONT DISC BRAKES - R.R.

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+RProceed with removal1. Undo the bolts (1a) and remove the front brake caliper brackets (1b).    Op. 3310A32 FRONT BRAKE CALLIPERS BOTH R R 1. Unscrew the bolts (1a) and remove the front brake discs (1b). Refitting ( Removing ) 1. Refit the front brake discs (1a) in their seatings and tighten the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Pin	FRONT BRAKE DISC.	M8	(Wheel hub side) 1.0 ÷ 1.4

1. Place the front brake caliper brackets (1a) back in their housings and fix them tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT BRAKE CALIPER BRACKET	M12	(Stub axle side) 10.0 ÷ 11.0

Proceed with refitting    Op. 3310A32 FRONT BRAKE CALLIPERS BOTH R R.Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.Proceed with refitting    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R.Connect the negative (-) battery terminal.Remove the car from the ramps.