3330B24 BRAKE PEDAL - R R FOR VERSIONS WITH MANUAL GEARBOX WITH HYDRAULIC SELECTION (ROBOTIZED GEARBOX) - Lancia - MUSA - eLearn

184001216 - 3330B24 BRAKE PEDAL - R R FOR VERSIONS WITH MANUAL GEARBOX WITH HYDRAULIC SELECTION (Robotized gearbox)

) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 Battery

Op. 7040L37 GEAR LEVER PLATE - R R Op. 7040A65 PASSENGER COMPARTMENT BOX LOCK , ONE , R R Op. 7040A19 CUSHION PADDING - R R Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R. Op. 7040A30 LEFT INSTRUMENT PANEL LOWER TRIM - R.R. Op. 5550D10 BRAKE LIGHT SWITCH - R+R1. Working at the rear of the brake pedal, press the white retaining tabs (1a) securing the brake servo push rod (1b) to the brake pedal (1c). 1. Remove the black retaining device (1a), then release the brake servo push rod (1b) from the brake pedal (1c) and keep the brake servo push rod spherical head housing cover (1d).

After every dismantling operation, the black retaining device for the brake servo push rod (1a) must be removed even if it appears to be intact.

1. Remove the clip (1a) and partly release the pin (1b).2. Remove the brake pedal.

Refitting ( Removing

) - Place the brake pedal in its housing, then secure it using the pin and the clip.1. Fit the new retaining device (1a) on the brake pedal (1b) so that the fastening clips (1c) are secured; position the brake servo push rod spherical head housing cover (1d).

After each dismantling operation, the black coloured retaining device for the brake servo push rod must always be replaced even if it appears to be intact.

- Lift up the brake pedal and position the brake servo push rod by the retaining device.- Press the brake pedal to fit the brake servo push rod on the retaining device. Op. 5550D10 BRAKE LIGHT SWITCH - R+R Op. 7040A30 LEFT INSTRUMENT PANEL LOWER TRIM - R.R. Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R. Op. 7040A19 CUSHION PADDING - R R Op. 7040A65 PASSENGER COMPARTMENT BOX LOCK , ONE , R R Op. 7040L37 GEAR LEVER PLATE - R R- Connect the negative battery terminal.