184001231 - 3340A13 ABS CENTRAL MOUNT - R R

Removing ( Refitting ) Proceed with removal    Op. 5530B10 BATTERY - R+RProceed with removal1. Release the right brake pipe from the band on the A.B.S. control unit mounting.    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT2. Undo the nuts (2a) and the bolt (2b) and remove the A.B.S. control unit mounting (2c).
Refitting ( Removing ) Place the A.B.S. control unit mounting back in its housing and secure it tightening the nuts and the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltABS CONTROL UNIT SUPPORTM8(Bodyshell side) 2.3 ÷ 2.8

FasteningComponentØValue(daNm)
-NutABS CONTROL UNIT SUPPORTM8(Bodyshell side) 2.3 ÷ 2.8
Fasten the rigid brake pipe to the A.B.S. control unit mounting using the band.Proceed with refitting    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT.Proceed with refitting    Op. 5530B10 BATTERY - R+R.Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.