184001242 - 3340B52 PUMP/CENTRAL OBS PIPE - R R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 5530B10 BATTERY - R+RProceed with removalProceed with removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.Proceed with removal1. Remove the protective cap on the brake caliper bleed valve.    Op. 7055B54 UNDER-ENGINE GUARD - R R2. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.3. Loosen the bleed valve on the brake caliper    Op. 4450B02 LEFT FRONT WHEEL R RWait for the brake-clutch reservoir to drain.
1. Undo the connectors (1a) and (1b) and remove the rigid pipe from the master cylinder to the ABS hydraulic unit (1c).
Refitting ( Removing ) 1. Place the rigid pipe from the master cylinder to the ABS hydraulic unit (1a) back in its seating, tighten the connectors (1b) and (1c) to the recommended torque.

FasteningComponentØValue(daNm)
1b-PIPE FROM PUMP TO HYDRAULIC CONTROL UNIT-(Master cylinder side) 1.4 ÷ 1.8

FasteningComponentØValue(daNm)
1c-PIPE FROM PUMP TO HYDRAULIC CONTROL UNIT-(Control unit side) 1.4 ÷ 1.8
Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.Proceed with refitting    Op. 4450B02 LEFT FRONT WHEEL R R.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Remove the car from the ramps.