184001247 - 3340B76 RIGID PIPE(ONE), LH OR RH, TO REAR BRAKE CYLINDER - R R

Removing ( Refitting ) Position the vehicle on the rampFOR THE LEFT RIGID PIPE, proceed with the removal    Op. 4450B06 LEFT REAR WHEEL R R.FOR THE RIGHT RIGID PIPE, proceed with the removal    Op. 4450B08 RIGHT REAR WHEEL R R.1. Remove the protective cap from the bleed screw for the rear brake cylinder.2. Connect the collection system (pipe and reservoir) to the bleed valve on the rear brake cylinder.3. Loosen the bleed valve on the rear brake cylinder.Wait for the brake-clutch reservoir to drain. 1. Undo the connectors (1a) and (1b) using wrench (1c), then remove the rigid pipe to rear brake cylinder (1d).

	Name	Country
1c	Box wrench for brake fittings	1.856.132.000

Refitting ( Removing ) 1. Refit the rigid pipe from rear brake cylinder (1a) and secure by tightening connectors (1b) and (1c) to the specified torque using wrench (1d).

	Fastening	Component	Ø	Value(daNm)
1b	Connector	RIGID PIPE REAR CYLINDERS (ABS)	-	(Flexible pipe side) 1.4 ÷ 1.8

	Fastening	Component	Ø	Value(daNm)
1c	Connector	RIGID PIPE REAR CYLINDERS (ABS)	-	(Rear brake shoe cylinder side.) 1.4 ÷ 1.8

	Name	Country
1d	Box wrench for brake fittings	1.856.132.000

Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.FOR THE LEFT RIGID PIPE, proceed with the refitting    Op. 4450B06 LEFT REAR WHEEL R R.FOR THE RIGHT RIGID PIPE, proceed with the refitting    Op. 4450B08 RIGHT REAR WHEEL R R.Remove the car from the ramps.