3380A10 HANDBRAKE LEVER - R+R - Lancia - MUSA - eLearn

184001256 - 3380A10 HANDBRAKE LEVER - R+R

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal 3380A44 handbrake/linkage protection - r+r Proceed with removal1. Loosen adjustment nut (1a), then disconnect cables (1b) from the mount. Op. 7040L20 TUNNEL TRIM - R R2. Disconnect the electrical connection from the handbrake 'on' warning light switch.3. Undo the bolts (3a) and remove the handbrake lever (3b).

	Name	Connector
2	Handbrake switch	I40

Refitting ( Removing

) Fit the handbrake lever and tighten the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	HANDBRAKE LEVER	M8	(Bodyshell side ) 2.4 ÷ 3.0

Connect the electrical connection to the handbrake 'on' warning light switch.Connect the cables to the mount.Proceed with refitting Op. 7040L20 TUNNEL TRIM - R R.Proceed with refitting Op. 3380A04 HANDBRAKE - CHECK TRAVEL.Proceed with refitting 3380A44 handbrake/linkage protection - r+r .Connect the negative (-) battery terminal.