184001264 - 4110A46 INTERMEDIATE SHAFT FOR CONNECTION TO STEERING BOX RR

Removing ( Refitting ) Proceed with removal 7040L37 gear lever plate - r r Proceed with removalProceed with removal 7040A65 passenger compartment box lock , one , r r Proceed with removalProceed with removal 7040A19 cushion padding - r r Proceed with removalProceed with removal    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R.Proceed with removalProceed with removal 7040A30 Left instrument panel lower TRIM - R.R. 1. At the bench, undo the bolt (1a) and remove the intermediate shaft connected to the steering box (1b).    Op. 5580C18 AIR BAG MODULE - R+R
Closely observe the safety regulations established for this operation.    Op. 5580C AIR BAG SYSTEM
4110A11 steering wheel - r+r for replacement or check for versions with air bag 5550A12 complete stalk unit - r+r for versions with air bag     Op. 4110D20 STEERING ELECTRICAL CONTROL DEVICE - R R
Refitting ( Removing ) Place the intermediate shaft connected to the steering box back in its housing and secure it tightening the bolt to the recommended torque.
The intermediate shaft fork must be inserted fully in the electric steering device output shaft only after the lock nut has been withdrawn from its seating. The bolt must be inserted correctly inside its seating after the fork has been fitted in the output shaft of the electric steering device. If the intermediate shaft fork is not correctly fitted on the output shaft or the bolt is not correctly positioned in its seating, these components could become disconnected and there could be a loss of steering.

FasteningComponentØValue(daNm)
-----
Proceed with refitting    Op. 4110D20 STEERING ELECTRICAL CONTROL DEVICE - R R.Proceed with refitting 5550A12 complete stalk unit - r+r for versions with air bag .Proceed with refitting 4110A11 steering wheel - r+r for replacement or check for versions with air bag .Proceed with refitting    Op. 5580C18 AIR BAG MODULE - R+R.Proceed with refitting 7040A30 Left instrument panel lower TRIM - R.R. .Proceed with refitting    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R..Proceed with refitting 7040A19 cushion padding - r r .Proceed with refitting 7040A65 passenger compartment box lock , one , r r .Proceed with refitting 7040L37 gear lever plate - r r .