184001284 - 4410C10 FRONT SUSPENSION STABILIZER BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R1. Undo the bolts fixing the anti-roll bar to the lower track control arm.2. Undo the bolts fixing the anti-roll bar to the front suspension crossmember.3. Remove the front suspension anti-roll bar. Refitting ( Removing ) .

The flexible mountings and the anti-roll bar should show no signs of deterioration or else the mountings and the actual anti-roll bar should be replaced.

1. Replace the front suspension anti-roll bar in its housing.2. Tighten the bolts fixing the anti-roll bar to the front suspension crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	FRONT ANTI-ROLL BAR	M8	(Front suspension crossmember side) 3.2 ÷ 3.9

3. Tighten the bolts fixing the anti-roll bar to the lower track control arm to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3	Bolt	FRONT ANTI-ROLL BAR	M8	(Lower track control arm side) 3.2 ÷ 3.9

Proceed with refitting    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R.Remove the car from the ramps.