5580C44 FRONT SIDE BAG MODULE ONE LH OR RH R R - Lancia - MUSA - eLearn

184001522 - 5580C44 FRONT SIDE BAG MODULE ONE LH OR RH R R

FOLLOW ALL THE RECOMMENDED SAFETY RULES (see 5580C - Precautions).

) Op. 7045A43 SEAT EXTERIOR GUARD - R R Op. 7045A19 R R HANDLE FOR FRONT SEAT FORE AND AFT ADJUSTMENT1. Undo the Velcro on the outer side of the seat.2. Disengage the locking profile (2a) from the section (2b).3. Undo the Air Bag module nuts.

1. Slightly move the padding (1a) and disconnect the electrical connection (1b).2. Remove the Air Bag module.

Place the Air Bag module in the special cupboard, resting it on a free surface with the bag facing upwards.

Refitting ( Removing

) Observe the following precaution.

Handle the Air Bag module with extreme caution. Ensure the battery is disconnected.

If a new module is being fitted, attach the labels as described below.1. Detach the removable part (1b) of the adhesive label from the new module (1a). Place a copy of the label (1b) in a specific file containing the vehicle details (model, registration data, chassis number) and the serial number of the old module. This file should be kept for future checks.2. Apply the detachable part of the original label (1b) to the bottom of the seat, where there are already similar labels for the seat, squab cover and Air Bag wiring. However, it should first be perforated to indicate the month and 14 years after the year when the module is fitted (e.g. 2017 will correspond to 2003).

Position the airbag module connecting the electrical connection.Tighten the retaining nuts.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT SIDE AIR BAG MODULE ASSEMBLY.	M6	0.8

Op. 7045A19 R R HANDLE FOR FRONT SEAT FORE AND AFT ADJUSTMENT Op. 7045A43 SEAT EXTERIOR GUARD - R RMove the seat through all its various settings to ensure that movements take place without binding or noise.Using the Examiner, check that the system has not picked up errors during the operation.