184001529 - 5580H06 WIRING OF PARKING SENSOR SYSTEM R R
Removing
(
Refitting
)
Position the vehicle on a lift and raise it.1. Undo the rear bumper lower bolts.2. Slightly lower the bottom edge (2a) of the bumper and disconnect the parking sensor electrical connection (2b).
Name
Connector
2b
Parking sensor unit
K97
1. Disconnect the electrical connection for the sensor wirinng.
Name
Connector
1
Parking sensor coupling
D89
2. Release the wiring retainers.3. Recover the wiring.
Refitting
(
Removing
)
Check that the wiring is undamaged and that the individual conductors are firmly attached to the connections.If necessary, check the continuity.Position the wiring and secure it using the retainers.Connect the electrical connections.Tighten the lower bumper bolts.Check that the parking sensors are working.
Removing
(
Refitting
)
Position the vehicle on a lift and raise it.1. Undo the rear bumper lower bolts.2. Slightly lower the bottom edge (2a) of the bumper and disconnect the parking sensor electrical connection (2b).
