184001767 - 7045D21 TRIM OF ONE FRONT SEAT LH OR RH RR WITH SEAT REMOVED
Removing
(
Refitting
)
Op. 7045A14 R R HANDLE FOR FRONT SEAT FORE AND AFT ADJUSTMENT1. Release the surround (1a) for the cushion cover; use a suitable size screwdriver (1b) to open the duct (1c). Extract the profile (1d) of the cover releasing it from the retainers (1e).2. Remove the steel seat base.
1. Release the cover from the perimeter of the upholstery.2. Use clippers to cut the retaining rings between the trim and the padding.3. Separate trim (3a) from padding (3b).
Refitting
(
Removing
)
Check that the cover is undamaged.Fit the trim on the padding.Connect the cover to the upholstery attaching the retaining rings.1. Working on the base of the seat using a mallet (1a), shape the edge (1b) of the seat cover retaining duct; If necessary, restore the retainers (1c) to their correct position.
1. Position the upholstery and cover (1a) on the seat base (1b).2. Fit the perimeter edges of the cushion cover on the upholstery.3. Attach the perimeter profile of the cover to the duct. Fit the cover onto the padding.
Removing
(
Refitting
)
Op. 7045A14 R R HANDLE FOR FRONT SEAT FORE AND AFT ADJUSTMENT1. Release the surround (1a) for the cushion cover; use a suitable size screwdriver (1b) to open the duct (1c). Extract the profile (1d) of the cover releasing it from the retainers (1e).2. Remove the steel seat base.
