184001812 - 7055B36 PROTECTIVE MOULDING ON REAR BUMPER - R R
Removing
(
Refitting
)
1. Position a double layer of body tape (1a) along the entire perimeter of the moulding (1b).2. Move the moulding (1b) releasing the retainers (2a).3. Recover the trim.
Refitting
(
Removing
)
Check that the moulding is not damaged and that the retainers are intact.Place the moulding in position attaching the retainers.Remove the protective adhesive tape.
Removing
(
Refitting
)
1. Position a double layer of body tape (1a) along the entire perimeter of the moulding (1b).2. Move the moulding (1b) releasing the retainers (2a).3. Recover the trim.