184001821 - 7055B33 PROTECTIVE MOULDING ON REAR BUMPER (1), LH OR RH - R R
Removing
(
Refitting
)
1. Place double-sided adhesive bodywork tape (1a) along the entire perimeter of the moulding (1b).2. Using a plastic blade, remove the moulding (1a) releasing the retainers (2a).Refitting
(
Removing
)
Check that the moulding is not damaged.Position the moulding attaching the retainers.Remove the protective adhesive tape.
Removing
(
Refitting
)
1. Place double-sided adhesive bodywork tape (1a) along the entire perimeter of the moulding (1b).2. Using a plastic blade, remove the moulding (1a) releasing the retainers (2a).