184000800 - 1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE

Removing ( Refitting ) Position a hydraulic jack under the crankcase sump.1. Undo nuts (1a) and (1b), then remove the timing side power unit support flexible mounting (1c).
Refitting ( Removing ) 1. Place the timing side power unit support flexible mounting (1a) in position and secure it tightening the nuts (1b) and (1c) to the recommended torque.

FasteningComponentØValue(daNm)
1bNutFRONT RUBBER MOUNTSM10(Rigid support side) 4.5 ÷ 5.5

FasteningComponentØValue(daNm)
1cNutFRONT RUBBER MOUNTSM10(Bodyshell side) 4.1 ÷ 5.0
Remove the hydraulic jack from under the crankcase sump.