184000836 - 1020D30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS

Removing ( Refitting ) 1. Undo the flywheel side oil seal cover.2. Cut the sealant between the flywheel side oil seal cover and the crankcase sump using the tool.

	Name	Country
2	Blade	1.870.718.000

3. Remove the flywheel side oil seal cover. Refitting ( Removing ) Clean residue traces off the contact surfaces between flywheel side oil seal cover and crankcase sump.Apply a strip of specified silicon sealant to the contact surface between the crankcase sump and the flywheel side oil seal cover.

	Type	Component	Name	Qty.
-	Sealant	OIL SUMP	Silicon sealant	-

1. Place the flywheel side oil cover (1a) back in its housing using the tools (1b) and (1c).

	Name	Country
1b	Grip	1.860.879.000

	Name	Country
1c	Fitting tool	1.860.881.000

2. Tighten the bolts for the oil cover, flywheel side, to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	FLYWHEEL SIDE COVER	M6	0.9 ÷ 1.1