184001015 - 1080B95 REAR LAMBDA PROBE WITH CATALITIC CONVERTER R R

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery A1B
1. Disconnect the electrical connection for the rear Lambda sensor for the catalytic converter.

NameConnector
1Lambda sensor on catalyzer K17
2. Using a suitable commercial wrench, undo and remove the rear Lambda sensor for the catalytic converter.
Refitting ( Removing ) Place the rear Lambda sensor for the catalytic converter back in its housing and tighten it to the recommended torque Using a suitable commercial wrench

FasteningComponentØValue(daNm)
--CONVERTER REAR LAMBDA SENSORM184.1 ÷ 5.0
Connect the electrical connection for the front Lambda sensor for the catalytic converter.Connect the negative (-) battery terminal.Remove the car from the ramps.