184001041 - 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery A1B
1. Disconnect the electrical connection from the engine oil pressure warning light switch.

NameConnector
1Engine oil pressure sensor (switch) K30
2. Undo and remove the engine oil pressure warning light switch.
Refitting ( Removing ) Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

FasteningComponentØValue(daNm)
--OIL PRESSURE W/LM142.9 ÷ 3.5
Connect the electrical connection to the engine oil pressure warning light switch.Connect the negative (-) battery terminal.Remove the car from the ramps.