1088B20 ENGINE COOLING RADIATOR - R + R - Lancia - MUSA - eLearn

184001062 - 1088B20 ENGINE COOLING RADIATOR - R + R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACEProceed with removal1. Loosen the band and disconnect the lower radiator coolant outlet hose from the radiator, radiator side. Op. 7210E10 R.R. FRONT BUMPER

Recover the coolant using a suitable container.

1. Disconnect the electrical connections from the engine cooling fan resistor.

	Name	Connector
1	Engine fan adjustment resistor	O10

2. Disconnect the electrical connection for the radiator cooling fan.

	Name	Connector
2	Engine electric fan motor	N11

3. Loosen the band and disconnect the upper coolant inlet hose to the radiator.

1. Undo the bolt fixing the radiator to the bodyshell.Secure the air conditioning condenser to the bodyshell.2. Undo the bolts fixing the air conditioning condenser.

1. Position a hydraulic jack under the radiator lower crossmember.2. Undo the bolts fixing the lower radiator crossmember3. Lower the hydraulic jack and remove the lower radiator crossmember (3a), complete with engine cooling radiator (3b) and radiator cooling fan.

Refitting ( Removing

) Place the lower radiator crossmember complete with engine cooling radiator and radiator cooling fan back in its housing using the hydraulic jack.Tighten the bolts fixing the lower radiator crossmember.Tighten the bolts fixing the air conditioning condenser.Tighten the bolt fixing the radiator to the bodyshell.Connect the radiator upper coolant inlet hose to the radiator and tighten the band.Connect the electrical connection to the radiator cooling fan.Connect the electrical connections to the resistor for the engine cooling fan.Connect the lower coolant outlet hose from the radiator, radiator side, and tighten the band.Proceed with refitting Op. 7210E10 R.R. FRONT BUMPER.Proceed with refitting Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE.Connect the negative (-) battery terminal.Refill the engine cooling system with coolant Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.Remove the car from the ramps.