184001111 - 1820B49 SUPPLY PIPE FROM (PUMP) - MASTER CYLINDER R.R.

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B02 LEFT FRONT WHEEL R RProceed with removalRemove the cap on the bleed valve.    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.Loosen the bleed screw and let the hydraulic clutch system drain completely.1. Lift the retaining clip (1a) and disconnect the pipe from the master cylinder (1b), operating cylinder side.2. Release the master cylinder supply pipe (2a) from the bands (2b).3. Lift up the retaining clip (3a) and disconnect the pipe from the master cylinder (3b), master cylinder side and remove it. Refitting ( Removing ) Place the pipe from the master cylinder back in its housing, introduce it fully into the housing on the master cylinder and secur it using the retaining clip.Fasten the master cylinder supply pipe using the bands.Fit the pipe from the master cylinder fully home in its seat on the clutch operating cylinder and secure with the retaining clip.Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting 0010T67 hydraulic clutch system bleed air .Proceed with refitting    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 4450B02 LEFT FRONT WHEEL R R.Remove the car from the ramps.