184001133 - 2110D52 L/H FLANGE ON DIFFERENTIAL - R + R WITH DRIVE SHAFT REMOVED

Removing ( Refitting ) 1. Undo the plug and drain the manual gearbox and differential.
Collect the manual gearbox and differential oil in a suitable container.
1. Remove the left differential internal driveshaft using a special lever.2. Undo the bolts (2a) and remove the left flange on the differential (2b) complete with oil seal.Remove the adjustment shim.
At the bench, remove the oil seal from the left flange on the differential.
Take care not to damage the oil seal seat during removal.
Refitting ( Removing ) 1. Fit a new oil seal (1a) on the left flange on the differential using the tools (1b) and (1c).

NameCountry
1bGrip1.870.007.000

NameCountry
1cFitting tool1.870.629.000
Place the adjustment shim back in its housing.1. Place the left flange on the differential (1a) back in its housing complete with oil seal and secure it tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltMAN G/BOX DIFF SEALING FLANGE/SM8(Differential side) 1.8 ÷ 2.2
2. Place the left differential internal driveshaft back in its housing.
1. Tighten the manual gearbox and differential fluid drain plug to the recommended torque.

FasteningComponentØValue(daNm)
1Drain plugGEAR CASING PADSM16(Differential side) 1.6 ÷ 2.0
Refill the manual gearbox and differential    Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY.