184001150 - 2127A12 HAND LEVER OF MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R (Robotized gearbox)

Removing ( Refitting )     Op. 2127A20 COVER OF CONTROL LEVER/HANDLE FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R.    Op. 2127A16 PANEL OF CONTROL LEVER FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R1. Disconnect the electrical connections (1a) and (1b).
DescriptionConnector
1aRobotized gearbox AUTO function switch See H34 ROBOT GEARBOX AUTO FUNCTION SWITCH.
DescriptionConnector
1bGear controls See H37 GEAR CONTROLS
2. Undo the nuts (2a) and the bolt (2b) and remove the electro-hydraulic selection manual gearbox manual control lever assembly (2c). - If necessary, proceed with dismantling the electro-hydraulic selection manual gearbox manual control lever working as described below.1. Remove the protection.2. Undo the bolts (2a) and separate the electro-hydraulic selection manual gearbox manual control lever (2b) from the support (2c). Refitting ( Removing ) - Assemble the electro-hydraulic selection manual gearbox manual control lever with the support and tighten the fixing bolts.- Place the protection back in its housing.- Place the electro-hydraulic manual gearbox control lever assembly back in its housing and secure it using the bolt and the nuts.- Connect the electrical connections.    Op. 2127A16 PANEL OF CONTROL LEVER FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R.    Op. 2127A20 COVER OF CONTROL LEVER/HANDLE FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R