184001227 - 3330E34 L/H OR R/H INTERMEDIATE HOSE (ONE) TO REAR BRAKES

Removing ( Refitting ) Position the vehicle on the rampFOR THE LEFT FLEXIBLE PIPE, proceed with the removal    Op. 4450B06 LEFT REAR WHEEL R R.FOR THE RIGHT FLEXIBLE PIPE, proceed with the removal    Op. 4450B08 RIGHT REAR WHEEL R R.1. Remove the protective cap from the bleed screw for the rear brake cylinder.2. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.3. Loosen the bleed valve on the rear brake cylinder.Wait for the brake-clutch reservoir to drain. 1. Remove the retaining clips.2. Under connectors (2a) and (2b) using tool (2c).

	Name	Country
2c	Box wrench for brake fittings	1.856.132.000

3. Remove the intermediate hose to the rear brakes. Refitting ( Removing ) 1. Refit the intermediate hose to the rear brakes (1a) and tighten connectors (1b) to the specified torque using tool (1c).

	Fastening	Component	Ø	Value(daNm)
1b	Connector	REAR BRAKE INTERM HOSE	-	(Rigid pipe side) 1.4 ÷ 1.8

	Name	Country
1c	Box wrench for brake fittings	1.856.132.000

2. Refit the retaining clips in their seats. Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.FOR THE LEFT FLEXIBLE PIPE, proceed with the refitting    Op. 4450B06 LEFT REAR WHEEL R R.FOR THE RIGHT FLEXIBLE PIPE, proceed with the refitting    Op. 4450B08 RIGHT REAR WHEEL R R.Remove the car from the ramps.