184001233 - 3340A26 LEFT FRONT WHEEL RPM SENSOR - R R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 5530B10 BATTERY - R+RProceed with removalProceed with removal    Op. 4450B02 LEFT FRONT WHEEL R R1. Disconnect the electrical connection for the left front wheel rpm sensor.    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

	Name	Connector
1	Left. front wheel sensor for ABS	K70

1. Undo the bolt (1a) and disconnect the left front wheel rpm sensor (1b) from the front pillar.2. Disengage the left front wheel rpm sensor electrical wiring from the attachments in the wheelarch.3. Remove the left front wheel rpm sensor after withdrawing the electrical wiring from the passage on the bulkhead. Refitting ( Removing ) Refit the left front wheel rpm sensor by passing the electrical wiring through the passage on the bulkhead.Refit the left front wheel rpm sensor back in its housing on the pillar and fix it tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ABS SYSTEM FRONT WHEEL RPM SENSOR	M6	(Stub axle side) 0.6 ÷ 0.8

Secure the right front wheel rpm sensor electrical wiring to the attachments in the wheelarch.Connect the electrical connection for the left front wheel rpm sensor.Proceed with refitting    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 4450B02 LEFT FRONT WHEEL R R.Proceed with refitting    Op. 5530B10 BATTERY - R+R.Remove the car from the ramps.