3340A28 RIGHT FRONT WHEEL RPM SENSOR - R R - Lancia - MUSA - eLearn

184001234 - 3340A28 RIGHT FRONT WHEEL RPM SENSOR - R R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.1. Disconnect the electrical connection for the right front wheel rpm sensor. Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

	Name	Connector
1	Right. front wheel sensor for ABS	K71

1. Undo the bolt (1a) and disconnect the right front wheel rpm sensor (1b) from the front pillar.2. Disengage the right front wheel rpm sensor electrical wiring from the attachments in the wheelarch.3. Remove the right front wheel rpm sensor after withdrawing the electrical wiring from the passage on the bulkhead.

Refitting ( Removing

) Refit the right front wheel rpm sensor by passing the electrical wiring through the passage on the bulkhead.Place the right front wheel rpm sensor back in its housing on the pillar and fix it tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ABS SYSTEM FRONT WHEEL RPM SENSOR	M6	(Stub axle side) 0.6 ÷ 0.8

Secure the right front wheel rpm sensor electrical wiring to the attachments in the wheelarch.Connect the electrical connection for the right front wheel rpm sensor.Proceed with refitting Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting Op. 4450B04 RIGHT FRONT WHEEL R R.Connect the negative (-) battery terminal.Remove the car from the ramps.