184001266 - 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOW-IN/TOW-OUT SEPARATELY

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+RMeasure the length of the steering rods to be used for refitting.1. Loosen the nuts fixing the steering rods to the steering box.2. Undo the nut (2a) and disconnect the steering rods (2b) from the steering knuckles using the tool (2c).3. Undo the steering rods from the steering box and remove them.

NameCountry
2cExtractor1.871.000.700
Refitting ( Removing ) 1. Place the steering rods in their housings, tighten them to the steering box ensuring the lengths measured at the removal are restored.2. Tighten the nuts fixing the steering rods to the steering box to the recommended torque.

FasteningComponentØValue(daNm)
2NutADJUSTABLE STEERING LINKSM12(Steering box side) 4.5 ÷ 5.5
3. Connect the steering rods (3a) to the steering knuckles and tighten the nuts (3b) to the recommended torque.

FasteningComponentØValue(daNm)
3bNutADJUSTABLE STEERING LINKSM10(Steering knuckle side) 3.6 ÷ 4.4
Proceed with refitting    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R.Remove the car from the ramps.