184001286 - 4410D13 FRONT SUSPENSION BEAM - R R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R. Refitting ( Removing ) 1. Place the front suspension crossmember (1a), complete with lower track control arms (1b) and anti-roll bar (1c), back in its housing using the hydraulic jack.2. Tighten the bolts (2a) and (2b) fixing the front suspension crossmember to the bodyshell to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2a	Side bolt	ENGINE OR ROD ANCHORAGE BEAM	M12	(Bodyshell side) 10.5 ÷11.6

	Fastening	Component	Ø	Value(daNm)
2b	Rear bolt	ENGINE OR ROD ANCHORAGE BEAM	M12	(Bodyshell side) 11.4 ÷ 12.6

3. Remove the hydraulic jack from underneath the front suspension crossmember.4. Tighten the bolts fixing the power steering box to the front suspension crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
4	Bolt	STEERING BOX (RACK AND PINION)	M12	(Front suspension crossmember side) 6.7 ÷ 7.4

5. Connect the lower track control arms to the steering knuckles and tighten the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
5	Bolt	FRONT SUSPENSION LOWER LEVER	M10	(Hub steering knuckle side) 5.9 ÷ 7.2

Proceed with refitting 1008C30 power unit lower reaction link r r . Proceed with removal 1076B30 front exhaust silencer - r + r . Proceed with refitting 1076B30 front exhaust silencer - r + r .