5050B42 WINDSCREEN WIPER MOTOR - R+R - Lancia - MUSA - eLearn

184001399 - 5050B42 WINDSCREEN WIPER MOTOR - R+R

) Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R(right and left) Op. 7210E22 WINDSCREEN BASE TRIM 7035A54 WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R. Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR1. Mark the position of the rotation lever (1a) in relation to the mounting (1b).2. Undo the centre nut.3. Undo the bolts.4. Remove the motor.

Refitting ( Removing

) Check that the windscreen wiper motor is not damaged and operating efficiently.If a new motor is being fitted, transfer the marks made whilst dismantling the old motor.1. Refit the motor, in accordance with the marks made during the dismantling with the lever (1a) aligned with the mark on the mounting (1b).

Tighten the bolts.Tighten the centre nut.

	Fastening	Component	Ø	Value(daNm)
-	Nut	WINDSCREEN WIPER MECHANISM	M6	1.6

Before refitting the windscreen wiper blades, the position of the pins temporarily connecting the motor to the connector and activating it through the control for the front windscreen wipers must be zeroed. Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR 7035A54 WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R. Op. 7210E22 WINDSCREEN BASE TRIM Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+RCheck that the wiper is operating efficiently.