184001466 - 5540B24 HIGH BEAM BULB (ONE) OF ONE HEADLAMP/LIGHT CLUSTER LH OR RH R R

Removing ( Refitting ) Open the bonnet.1. Disconnect the electrical connection for the lamp.2. Rotate the cover retainer.3. Move the cover (3a) releasing the retainer (3b).
1. Release the bulb retaining clip.2. Extract the bulb.3. Disconnect the connection (3a) and keep the bulb and cable (3b).
If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.
Refitting ( Removing ) Check the condition of the bulb and make sure that it is clean.
Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.
1. Connect the electrical connection and fit the bulb positioning it as illustrated.Attach the retaining spring.
Refit the cover correctly, exerting pressure in the centre of it, until it clicks into place. Check that it is secured.Reposition the cover retainer.Connect the electrical connection for the lamp.Check that the bulb is working.