184001467 - 5540B25 LOW BEAM BULB (ONE) OF ONE HEADLAMP/LIGHT CLUSTER LH OR RH R R

Removing ( Refitting ) Open the bonnet.1. Disconnect the electrical connection for the lamp.2. Rotate the cover retainer.3. Move the cover (3a) releasing the retainer (3b).
1. Rotate the bulb holder (1a) releasing the tabs (1b) from the retainers (1c), then extract the bulb holder and bulb.2. Extract the bulb (2a) from the bulb holder (2b).
If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.
Refitting ( Removing ) Check the condition of the bulb and make sure that it is clean.
Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.
1. Fit the bulb in the bulb holder and fit the bulb holder attaching the tabs in the retainers. The correct position for the bulb is illustrated.
Refit the cover correctly, exerting pressure in the centre of it, until it clicks into place. Check that it is secured.Reposition the cover retainer.Connect the electrical connection for the lamp.Check that the bulb is working.