184001533 - 5580P12 CONNECT PANEL REPLACE

Removing ( Refitting ) 1. Fit the tools in the side openings of the connect panel and tighten them. Make sure that the tools are correctly engaged. 1. Extract the Connect panel pulling the tools.

Avoid using force on the buttons or in other delicate areas.

1. Release the cable retainers (1a, 1b, 1c).2. Disconnect the electrical connections (2a, 2b, 2c).3. Disconnect the GPS aerial connector (green).4. Disconnect the GSM aerial connector (grey).5. Disconnect the radio aerial connector (round black).- Keep the Connect panel. Refitting ( Removing ) - Check that the Connect panel is not damaged.- Connect the electrical connections and attach each cable to the retainers following the order illustrated below.1. Fit the three colour radio connection.2. Fit the black radio connection.3. Fit the GPS aerial connection (green) and fasten the cable to retainers A and B.4. Fit the radio connection (white) and fasten the cable to the retainer B.5. Fit the GSM aerial connection (grey) and fasten the cable to retainers C and A.6. Fit the radio connection (round black) and fasten the cable to the retainer B.

Fit the cables carefully and attach them to the retainers to prevent damage when the Connect panel is inserted in the housing in the dashboard.

- Insert the Connect panel in its housing checking that the fastening clips are correctly attached.

Whilst fitting the Connect panel, press in the area of the tool attachment openings and avoid forcing the buttons or other delicate areas.

- Check the operation of the Connect panel.