184001918 - E2012 MAIN BEAM HEADLIGHTS - DESCRIPTION

Description

The vehicle is equipped with two main in the headlamps.

The main beams are switched on by the steering column switch unit:

• with the dipped beams on, by pushing the lever towards the dashboard (stable mode)
• in flashing mode, by pulling the lever toward the steering wheel (unstable mode)

The low beam activation relay is controlled by the Body Computer relay energizing is activated by enablement signals with key in the ON position (INT) and a specific stalk switch command.Activation/deactivation information is sent via the CAN network: in this way, the main beam warning light is activated in the instrument panel.

for legal reasons, if the dusk sensor is activated, only the flasher can be activated and not the constant main beams; the AUTO function must be switched off in order to operate these lights.