184002066 - E3045 BOOT AND FUEL FLAP OPENING - FUNCTIONAL DESCRIPTION

Operational description

The "boot open" signal is sent by the switch - located in the handle I33 to pin 35 of connector E of the Body Computer M1. The RF aerial-receiver P93 sends the Body Computer M1 the opening/closing signal for the doors and for the boot as well according to the logic described previously at pins 21 and 31 of connector B    See E3040 CENTRAL LOCKING.According to the control logic illustrated, the Body Computer M1 implements the boot release positive control function from pin 11 of connector F - via the line supplied by fuse F38 of the junction unit under the dashboard B2, pin 18 of connector D - controlling the operation of the boot lock geared motor N57.The boot unlocking function, inside the Body Computer M1 pin 1 of connector F also has a dedicated earth connection: pin 20 of connector F.The geared motor N57 receives a power supply until the opening of the boot is detected: the "boot not properly shut" signal is, in effect, sent by switch I11 which is connected to pin 24 of connector E.

the contact in question signals the "boot not properly shut" condition; the switch is fitted with another contact that signals the "boot open" condition, a contact used by the boot light function E2520 LUCE CASSETTO - LUCE BAULE - LUCE ANTINA PARASOLE