184002552 - 7040B39 one boot lid lock striker cover r r
Removing
(
Refitting
)
Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R- Working at the bench, perform the following operations.1. Using flat-nosed pliers, pull pin (1a) in the direction indicated by arrow (1b).2. Withdraw pin (1a) and recover the cover return spring. | Take care when withdrawing the pin because the return spring is preloaded by a certain amount. |
Refitting
(
Removing
)
- Check that the cover s not damaged.1. Position the cover.2. Insert the pin.3. Position spring (3a) with the longest end in seat (3b).4. Push the pin fully home.- Check that the cover opens and closes correctly.