K06 TRIP METER DOES NOT ZERO - Lancia - MUSA - eLearn

With the ignition ON, the milometer cannot be zeroed using the TRIP button on the right steering column switch unit lever.

1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the Examiner to the diagnostic socket.Check that there are no faults in the instrument panel	Continue to Step 2	There are errors	Proceed in accordance with the instructions given by the diagnostic equipment
2	ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check: Connections between right steering column switch unit lever and instrument panel Connections between right steering column switch unit lever and earth; Steering column switch unit right lever power supply; Steering column switch unit right lever earth See E4010 INSTRUMENT PANEL	Continue to Step 3	Connections defective, earth or supply defective	Restore the correct connections, if necessary, replace the wiring: See E4010 INSTRUMENT PANEL
3	CHECK ON STEERING COLUMN SWITCH UNIT	All OK	Problems met	Operation
	Check that the TRIP button on the right steering column switch unit lever is working properly See E4010 INSTRUMENT PANEL	Continue to Step 4	Right lever defective	Replace the steering column switch unit Op. 5550A12
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis