184000481 - K08 DISPLAY DOES NOT SHOW OUTSIDE TEMPERATURE

With the ignition ON, the outside temperature is not displayed by the milometer.
Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation

Check:

  • that the instrument panel light dimmer has not been selected.
  • that the mode button has not been pressed
  • that there are no dashes displayed in place of the temperature
  • that there are no failure messages displayed
Continue to Step 1The display shows other informationRestore the display conditions using the centre control panel
There are dashes in place of the temperature.Continue to Step 2
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the Examiner to the diagnostic socket.

Check:

  • that there are no faults
  • the temperature measured by the driver's door node
Continue to Step 2There are errorsProceed in accordance with the instructions given by the diagnostic equipment
2CHECK ON ELECTRICAL CIRCUITAll OKProblems metOperation
Check that the connections between the outside temperature sensor and the driver's door connector are correct.Continue to Step 3Connections defectiveRestore the correct connections; if necessary, replace the wiring: See E6020 AIR CONDITIONING
3CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis