K143 ONE WARNING LIGHT ACTIVATED BY STEERING COLUMN SWITCH UNIT NOT WORKING - Lancia - MUSA - eLearn

When the lights are switched on from the stalk unit, the relevant warning light on the instrument panel does not come on.

The warning lights which come on when the stalk unit is operated are:Side/number plate lightsMain beam headlampsDirection indicators

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	With the ignition on, operate all the lights in question from the stalk unit, i.e.: With the ring nut, side/number plate lights With the lever, main beam headlamps (both permanently lit and flashing) With the lever, direction indicators (right and left) and check that they come on	Continue to Step 1	The side lights do not work	Continue as instructed See table I01 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING
			The main beam headlamps do not work	Continue as instructed See table I06 MAIN BEAM HEADLAMPS NOT WORKING
			The direction indicators do not work on both sides	Continue as instructed See table I10 DIRECTION INDICATORS / HAZARD WARNING LIGHTS
			The direction indicators do not work on one side	Continue as instructed See table I12 TURN SIGNALS RH OR LH SIDE NOT WORKING
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment and check the operation of the warning lights in question at the INSTRUMENT PANEL NODE through active diagnosis	End of diagnosis	The warning light does not come on	Replace the instrument panel Op. 5560B11