184000562 - M05 MANUAL FRONT WINDOWS NOT WORKING

If an obstacle is detected between the glass and the upper safety casing whilst the window is closing, it does not stop immediately or change direction.

The change of direction if an obstacle is detected lasts for around 300 ms.

		Results of the tests
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that there are no erros in the Door Node control unit involved	Continue to Step 2	Presence of errors in the door node involved	Continue according to the instructions for the diagnostic equipment
2	ELECTRICAL EQUIPMENT CHECK	All OK	Problems met	Operation
	Check the condition of the connection between the door node control unit involved and the safety sensor outer casing See E3050 ELECTRIC FRONT WINDOWS	Continue to Step 3	Connections broken	Restore the connections See E3050 ELECTRIC FRONT WINDOWS
3	Continue as instructed by the tester	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace the safety sensor casing Op. 7005D18