184000629 - Z81 COMMUNICATION WITH FAILURE WARNING LIGHTS ERROR

The diagnostic equipment signals the following error: "C1107 Communication with failure warning lights"

This error is signalled if there is an error at the B-CAN between the Body Computer and the instrument panel or if one of the warning lights (EBD, ABS or ESP) is faulty

		Results of the tests
1	PANEL INITIAL CHECK	All OK	Problems encountered	Operation
	Turn the key ON and check that the instrument panel carries out the initial check on the warning lights	Move on to Step 2	One or more of the warning lights does not come on	Replace the instrument panel    Op. 5560B10 ANALOGUE CONTROL PANEL - R+Rand move on to Step 4
2	INSTRUMENT PANEL CHECKS	All OK	Problems encountered	Operation
	Carry out the fault diagnosis using the Examiner on the instrument panel (NQS) to check for the presence of errors	Move on to Step 3	Error present	Solve the problem connected to the errorand move on to Step 4
3	ELECTRICAL CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check that the instrument panel is correctly connected to the CAN See E4010 STRUMENTO DI BORDO	Move on to Step 4	Electrical connections faulty	Restore the correct connections, if necessary, replace the instrument panel    Op. 5560B10 ANALOGUE CONTROL PANEL - R+R
4	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Delete the errors using the diagnostic equipment.Carry out the road test See Test    See Test 3340OA A.B.S. SYSTEM ACTUATION CHECKto ensure that the control unit checks whether there are any errors still present.Return to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis	.	-