184001178 - 2710A20 WHEEL END CONSTANT VELOCITY JOINT (ONE), L/H OR R/H - R + R WITH DRIVE SHAFT REMOVED - INCLUDES BOOT REPLACEMENT
Removing
(
Refitting
)
Place the drive shaft in a vice fitted with protective jaws.1. Remove the protective boot fastening bands.2. Move the protective boot back.3. Remove the wheel side constant velocity joint (3a) using the tools (3b) and (3c) using pliers on the circlip (3d) at the same time. | Name | Country |
|---|---|---|
| 3b | Counter weight | 1.847.017.000 |
| Name | Country |
|---|---|---|
| 3c | Adaptor | 1.860.889.000 |
Refitting
(
Removing
)
Wash the joint thoroughly using diesel or petrol, and visually check that there are no signs of seiaure or scoring on the balls and their seats.Fit a new protective boot on the driveshaft.Refit the constant velocity joint, wheel side, back in its seating complete with a new circlip.Refit the gaiter back in its seating, then fill it with the recommended grease. | Type | Component | Name | Qty. |
|---|---|---|---|---|
| - | Grease (g) | WHEEL END CONSTANT VELOCITY JOINT | TUTELA STAR 500 | - |