184001244 - 3340B56 RIGID PIPE FROM HYDRAULIC CONTROL UNIT TO RIGHT FRONT BRAKE - R.R.
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Position the vehicle on the rampProceed with removal     Op. 5530B10 BATTERY - R+RProceed with removalProceed with removal     Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.Proceed with removalProceed with removal     Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal     Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal     Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.1. Withdraw the retaining clips2. Undo the connector (2a) and disconnect the rigid pipe fromthe hydraulic unit to the front right brake (2b), hydraulic unit side, using tool (2c).     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.3. Release the rigid pipe from the hydraulic control unit to the front right brake (3a) from fastenings (3b).     Op. 3340B52 PUMP/CENTRAL OBS PIPE - R R     Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT     Op. 5040A60 PIPE FROM CONDENSER TO EVAPORATOR (EXPANSION PIPE) - R+R
		)
	Position the vehicle on the rampProceed with removal     Op. 5530B10 BATTERY - R+RProceed with removalProceed with removal     Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.Proceed with removalProceed with removal     Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal     Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal     Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.1. Withdraw the retaining clips2. Undo the connector (2a) and disconnect the rigid pipe fromthe hydraulic unit to the front right brake (2b), hydraulic unit side, using tool (2c).     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.3. Release the rigid pipe from the hydraulic control unit to the front right brake (3a) from fastenings (3b).     Op. 3340B52 PUMP/CENTRAL OBS PIPE - R R     Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT     Op. 5040A60 PIPE FROM CONDENSER TO EVAPORATOR (EXPANSION PIPE) - R+R|  | Name | Country | 
|---|---|---|
| 2c | Box wrench for brake fittings | 1.856.132.000 | 


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Place the rigid pipe from the hydraulic control unit to the right front brake back in its housing and secure with fastenings.1. Connect the rigid pipe from the hydraulic control unit to the front right brake (1a), flexible pipe side, and tighten the connector (1b) to the recommended torque using tool (1c).
		)
	Place the rigid pipe from the hydraulic control unit to the right front brake back in its housing and secure with fastenings.1. Connect the rigid pipe from the hydraulic control unit to the front right brake (1a), flexible pipe side, and tighten the connector (1b) to the recommended torque using tool (1c).|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| 1b | - | PIPE FROM CONTROL UNIT TO FRONT BRAKES | - | (Flexible pipe side) 1.4 ÷1.8 | 
|  | Name | Country | 
|---|---|---|
| 1c | Box wrench for brake fittings | 1.856.132.000 | 
