1008A42 GEAR BOX LEFT RIGID MOUNT - R R - Lancia - MUSA - eLearn

184000797 - 1008A42 GEAR BOX LEFT RIGID MOUNT - R R

) Proceed with removal Op. 5530B10 BATTERY - R+R.Proceed with removal Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with removal 1016A10 sound-proofing cover - r + r .1. Undo the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer, catalyzer side.2. Release the exhaust pipe between the precatalyzer and the catalyzer from the flexible mounting.

1. Undo the bolt fixing the power unit lower reaction rod to the front suspension crossmember.

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R.Position a hydraulic lift under the gearbox.1. Undo the bolt fixing the air conditioning system ipe to the power unit gearbox side rigid support.2. Undo the nut fixing the power unit gearbox side rigid support to the flexible mounting.3. Undo the upper bolts fixing the gearbox side rigid power unit support.

Lower the gearbox as necessary using the hydraulic lif.1. Undo the lower bolts (1a) and remove the gearbox side rigid power unit support (1b).

Refitting ( Removing

) Refit in its seating the gearbox side power unit rigid mount, and tighten the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M8	(Bodyshell side) 2.3 ÷ 2.8

Using the hydraulic lift, place the power unit back in position.Undo the nut fixing the gearbox side rigid power unit support to the flexbile mounting to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M12	(Flexible mounting side) 8.1 ÷ 9.9

Tighten the bolt fixing the air conditioning system pipe to the gearbox side power unit rigid support.Remove the hydraulic lift from under the gearbox.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.1. Tighten the bolt fixing the power unit lower reaction rod to the front suspension crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	LOWER ROD ON ENGINE	M12	(Front suspension crossmember side) 11.4 ÷ 12.6

1. Fasten the exhaust pipe between the precatalyzer and the catalyzer to the flexible mounting.2. Tighten the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer, catalyzer side to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Nut	PRE-CAT CONVERTOR/CAT CONVERTOR PIPE	M8	(Catalyitic preconverter side) 2.3 ÷ 2.8

Proceed with refitting 1016A10 sound-proofing cover - r + r .Proceed with refitting Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting Op. 5530B10 BATTERY - R+R.