184000811 - 1016A26 CAM COVER WITH BUILT IN OIL VAPOUR SEPARATOR R R

Removing ( Refitting ) Proceed with removal 1016A10 sound-proofing cover - r + r .1. Loosen the bands and disconnect the oil vapour recovery pipes from the tappet cover.2. Undo the bolts (2a) and remove the rocker cover (2b) complete with gasket.
Refitting ( Removing ) Place the tappet cover, complete with gasket, back in its housing and secure it tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCAM COVERM6(Cylinder head side) 0.9 ÷ 1.1
Connect the oil vapour recovery pipes to the cam cover and secure with the bands.Proceed with refitting 1016A10 sound-proofing cover - r + r .