1036B14 OVERHEAD CAMSHAFT - R R ON VEHICLE - WITH CYLINDER HEAD REMOVED - Lancia - MUSA - eLearn

184000880 - 1036B14 OVERHEAD CAMSHAFT - R R ON VEHICLE - WITH CYLINDER HEAD REMOVED

) Take the cylinder head to the workbench.1. Use a nut and locknut to unscrew the stud.2. Fit tool (2a) to cylinder head (2b) and secure using nuts (2c).

	Name	Country
2a	Support	1.860.470.000

1. Undo the bolts (1a) and remove the vacuum unit (1b) complete with O-Ring (1c).

1. Undo the bolt (1a) for the driven pulley using the tools (1b).

	Name	Country
1b	Support for counter-torque	1.860.831.000

2. Remove the toothed driven pulley.

1. Undo the camshaft cap bolts.2. Remove the camshaft support lubrication pipe.3. Remove the camshaft caps.

Mark the camshaft caps with a progressive number to ensure they are refitted in the correct order.

4. Remove the camshaft.5. Remove the camshaft front oil seal.

Refitting ( Removing

) Fit the camshaft.Fit the camshaft caps into their original positions prior to dismantling.Fit the camshaft support lubrication pipe.Tighten the camshaft cap bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	1.3 - 1.6

1. Fit a new camshaft front oil seal (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.824.000

Fit the driven pulley.Tighten the driven pulley bolt to torque using the tool.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TIMING DUCT PULLEY	M12	10.2 - 12.6

	Name	Country
-	Support for counter-torque	1.860.831.000

Fit the vacuum unit, complete with O-Ring, and fix it tightening the bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BRAKE SERVO VACUUM PUMP	M6	2.1 - 2.6

Remove the cylinder head from the supporting tools.Remove the cylinder head support tools from the vice and return them.