184000881 - 1036B36 FRONT CRANKSHAFT OIL SEAL-R R WITH TIMING BELT REMOVED

Removing ( Refitting ) 1. Loosen the bands and disconnect the oil vapour recovery pipes from the cam cover.2. Undo the bolts (2a) and remove the rocker cover (2b) complete with gasket. Proceed with removal    Op. 1032B40 TOOTHED-DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED1. Undo the bolts securing the front camshaft cap.2. Undo the two bolts (2a) and lift the camshaft journal lubrication pipe (2b) as much as necessary.3. Remove the front camshaft cap.4. Prise off and remove the camshaft front seal. Refitting ( Removing ) Refit the camshaft front cap.Tighten the camshaft bolts loosened previously to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M6	(Cylinder head side) 0.9 ÷ 1.1

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	(Cylinder head side) 1.4 ÷ 1.7

1. Fit a new crankshaft front oil seal (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.824.000

Proceed with refitting    Op. 1032B40 TOOTHED-DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVEDPlace the tappet cover, complete with gasket, back in its housing and secure it tightening the bolts to the recommended torque.Connect the oil vapour recovery pipe to the cam cover and secure with a band.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAM COVER	M6	(Cylinder head side) 0.9 ÷ 1.1