184000904 - 1040A40 PLUG FOR FUEL FILLER PIPE - R + R
Removing ( Refitting ) 1. Open the access flap to the fuel filler pipe cap.2. Release the fuel filler pipe cap safety device from the bodyshell.3. Undo and remove the fuel filler pipe cap.
.
If the fuel filler pipe cap is being replaced, keep the barrel following the instructions given below. |
It is not possible to order a single lock barrel or to order barrels simply by using a part code. When ordering barrels, observe the special procedure set out in 5580E - Special accessories. |
Refitting
(
Removing
)
.
If a new fuel filler pipe cap is being used, follow the instructions given below. |
Place the fuel filler pipe cap in its housing.Fasten the fuel filler pipe cap safety device to the bodyshell.Clean the fuel filler cap access flap.