1048B22 AIR DELIVERY SLEEVE FROM HEAT EXCHANGER TO INTAKE MANIFOLD - R + R - Lancia - MUSA - eLearn

184000931 - 1048B22 AIR DELIVERY SLEEVE FROM HEAT EXCHANGER TO INTAKE MANIFOLD - R + R

) Position the vehicle on the ramp.Proceed with removal Op. 5530B10 BATTERY - R+R.Proceed with removal Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R.1. Loosen the band and disconnect the air supply duct from heat exchanger to inlet manifold, heat exchanger side.

1. Undo the bolt (1a) and move the air conditioning pipe (1b) aside.

1. Undo the bolt securing the air supply hose from the heat exchanger to the inlet manifold.2. Loosen the band and disconnect the air supply duct from the heat exchanger to the inlet manifold, electropneumatic throttle body side, then remove it.

Refitting ( Removing

) Refit in its seating the air supply duct from heat exchanger to inlet manifold, connect it to the electropneumatic throttle body and tighten the relevant band.Tighten the bolt securing the air supply duct from heat exchanger to inlet manifold.Refit the air conditioning pipe in its seating and secure it with the bolt.Connect the air supply duct from heat exchanger to inlet manifold, heat exchanger side, and tighten the band.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting Op. 5530B10 BATTERY - R+R.Remove the car from the ramps.