184000952 - 1060E30 PRESSURE PUMP PULLEY - R R

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery A1B
    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM DEHYDRATE AND RECHARGE.Proceed with removal 1016A10 sound-proofing cover - r + r .Proceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with removal    Op. 1008A46 CAM SHAFT LEFT RIGID MOUNT - R R.Proceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with removal    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with removal 1092G10 single engine belt r r .Proceed with removal    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with removal    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.1. Stop the pressure pump pulley from rotating using two bolts.2. Undo the pressure pump pulley nut.Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley.
1. Remove the pressure pump pulley (1a) using the tool (1b).

NameCountry
1bExtractor1.860.854.001
Refitting ( Removing ) 1. Replace the pressure pump pulley in its housing.2. Stop the pressure pump pulley from rotating using two bolts.3. Tighten the pressure pump pulley nut to torque.

FasteningComponentØValue(daNm)
3NutPRESSURE PUMP CONTROL PULLEYM144.5 ÷ 5.5
Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley.
Proceed with refitting    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.Proceed with refitting    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with refitting 1092G10 single engine belt r r .Proceed with refitting    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with refitting    Op. 1008A46 CAM SHAFT LEFT RIGID MOUNT - R R.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting 1016A10 sound-proofing cover - r + r .    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM DEHYDRATE AND RECHARGE.Connect the negative (-) battery terminal.Remove the car from the ramps.