184000957 - 1060F10 FUEL INJECTORS

Removing ( Refitting ) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery A1B
Proceed with removal 1016A10 sound-proofing cover - r + r .Proceed with removal 1060F50 fuel return manifold - r r .Proceed with removal    Op. 1060F36 LINES TO INJECTORS - R R.Push the clips by hand and disconnect the pipe from the injectors to the fuel recovery manifold, injectors side.1. Undo the injector bracket nuts.2. Remove the injectors (2a) complete with brackets (2b) using the tool (2c).

NameCountry
2cExtractor1.870.739.000
Refitting ( Removing ) .
If the same injectors are being reused, mark the cylinder to which they belong so that they can be correctly refitted. If new fuel injector(s) are fitted, the self-learning procedure with the Examiner must be carried out.
Refit the fuel injectors in their seatings.Refit the fuel injector brackets in their seatings with the mounting pads and tighten the nuts to the specified torque.

FasteningComponentØValue(daNm)
-NutINJECTORS(DIESEL)M82.7 ÷ 3.3
Position the connectors for the pipe from the injectors to the fuel recovery manifold on the corresponding injector seats and fully insert them until the click of the spring is heard.Proceed with refitting    Op. 1060F36 LINES TO INJECTORS - R RProceed with refitting 1060F50 fuel return manifold - r r .Proceed with refitting 1016A10 sound-proofing cover - r + r .Connect the negative (-) battery terminal.