184000961 - 1060F36 LINES TO INJECTORS - R R

Removing ( Refitting ) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery A1B
Proceed with removal 1016A10 sound-proofing cover - r + r .Proceed with removal 1060F50 fuel return manifold - r r .1. Disconnect the electrical connections from the injectors.

NameConnector
1Injector N70
Undo the bolts and move the electrical wiring aside.2. Undo the connectors for the pipes from the fuel manifold to the injectors, fuel manifold side, using a suitable spanner.3. Undo the connectors (3a) of the pipes from fuel manifold to fuel injectors, injectors side, using the tool (3b).

NameCountry
3bKey1.870.672.000
4. Remove the pipes from the fuel manifold to the injectors.
When refitting, use new pipes from the fuel manifold to the injectors.
Refitting ( Removing ) 1. Fit the new pipes from the fuel manifold to the injectors and secure them using the connectors without tightening them.2. Tighten the connectors (2a) for the pipes from the fuel manifold to the injectors, injector side, to the recommended torque using the tool (2b).

FasteningComponentØValue(daNm)
2aConnectorFUEL MANIFOLD LINE TO INJECTORSM12(Injector side 22 24

NameCountry
2bKey1.870.672.000
3. Tighten the connectors for the pipes between the fuel manifold and the injectors, fuel manifold side, to the recommended torque using a suitable spanner.

FasteningComponentØValue(daNm)
3ConnectorPRESSURE PUMP LINE TO FUEL MANIFOLDM14(Fuel manifold side 22 24
Place the electrical wiring back in its seating and fix it using the bolts.4. Connect the electrical connections to the injectors.
Proceed with refitting 1060F50 fuel return manifold - r r .Proceed with refitting 1016A10 sound-proofing cover - r + r .Connect the negative (-) battery terminal.